Liste des publications ACL

Y. Le Gonidec, B. Kergosien, J. Wassermann, D. Jaeggi & C. Nussbaum 
Underground traffic‐induced body waves used to quantify seismic attenuation properties of a bimaterial interface nearby a main fault. 
Journal of Geophysical Research: Solid Earth, e2021JB021759, 2021
http://doi.org/10.1029/2021JB021759

1.    Amina, D., Said, K., Abdelhak, K., El Hadj, K., Kirgiz, M.S., 2020. Assessment of the effect of fine and coarse recycled aggregates and natural pozzolan on various properties of self-compacting concrete. ZKG INTERNATIONAL 73, 36–45.

2.    Ba, L., El Abbassi, I., Kane, C.S.E., Darcherif, A.-M., Ndongo, M., 2020. The influence of Typha Australis as an insulation panel on the thermal performance of building. E3S Web Conf. 170, 01003. https://doi.org/10.1051/e3sconf/202017001003

3.    Bouali, E., Ayadi, A., Kadri, E.-H., Kaci, A., Soualhi, H., Kallel, A., 2020. Rheological and Mechanical Properties of Heavy Density Concrete Including Barite Powder. Arabian Journal for Science and Engineering. https://doi.org/10.1007/s13369-019-04331-6

4.    El Yassi, M., El Abbassi, I., Pierre, A., Melinge, Y., 2020. Effect of phase change material using in building thermal comfort applications through several climate conditions. E3S Web Conf. 170, 01007. https://doi.org/10.1051/e3sconf/202017001007

5.    Ghedhab, M.E., El ABBASSI, I., Absi, R., Mélinge, Y., 2020. Numerical study of the effect of DSF walls geometrical shape on heat transfer. E3S Web Conf. 170, 01005. https://doi.org/10.1051/e3sconf/202017001005

6.    Hosseinpoor, M., Ouro Koura, B.-I., Yahia, A., Kadri, E.-H., 2020. Diphasic investigation of the visco-elastoplastic characteristics of highly flowable fine mortars. Construction and Building Materials 121425. https://doi.org/10.1016/j.conbuildmat.2020.121425

7.    Laidani, Z.E.-A., Benabed, B., Abousnina, R., Gueddouda, M.K., Kadri, E.-H., 2020. Experimental investigation on effects of calcined bentonite on fresh, strength and durability properties of sustainable self-compacting concrete. Construction and Building Materials 230. https://doi.org/10.1016/j.conbuildmat.2019.117062

8.    Mohamad, R., Hammadeh, H., Kousa, M., Wardeh, G., 2020. FRACTURE BASED NON LINEAR MODEL FOR REINFORCED CONCRETE BEAMS. INTERNATIONAL JOURNAL OF GEOMATE 18, 110–117. https://doi.org/10.21660/2020.65.66197

9.    Mustapha, F., El Abbassi, I., kaci, A., Kadri, E., Darcherif, M., 2020. Strategy of Container Assembly for a Positive Energy Impact in Poona India. E3S Web Conf. 170, 01004. https://doi.org/10.1051/e3sconf/202017001004

10.    Ndiaye, K., Cyr, M., Ginestet, S., 2020. Development of a cementitious material for thermal energy storage at low temperature. Construction and Building Materials 242, 118130. https://doi.org/10.1016/j.conbuildmat.2020.118130

11.    Nouali, M., Ghorbel, E., Derriche, Z., 2020. Phase separation and thermal degradation of plastic bag waste modified bitumen during high temperature storage. Construction and Building Materials 239. https://doi.org/10.1016/j.conbuildmat.2019.117872

12.    ouldkhaoua, Y., Benabed, B., Abousnina, R., Kadri, E.-H., 2020. Experimental study on the reuse of cathode ray tubes funnel glass as fine aggregate for developing an ecological self-compacting mortar incorporating metakaolin. Journal of Building Engineering 27. https://doi.org/10.1016/j.jobe.2019.100951

13.    Ouldkhaoua, Y., Benabed, B., Abousnina, R., Kadri, E.-H., Khatib, J., 2020. Effect of using metakaolin as supplementary cementitious material and recycled CRT funnel glass as fine aggregate on the durability of green self-compacting concrete. Construction and Building Materials 235. https://doi.org/10.1016/j.conbuildmat.2019.117802

14.    Ouro Koura, B.-I., Hosseinpoor, M., Yahia, A., Kadri, E.-H., Kaci, A., 2020. A new proportioning approach of low and normal binder self-consolidating concrete based on the characteristics of fine mortar and granular skeleton. Construction and Building Materials 239. https://doi.org/10.1016/j.conbuildmat.2019.117892

15.    Pierre, A., Weger, D., Perrot, A., Lowke, D., 2020. Additive Manufacturing of Cementitious Materials by Selective Paste Intrusion: Numerical Modeling of the Flow Using a 2D Axisymmetric Phase Field Method. Materials 13, 5024. https://doi.org/10.3390/ma13215024

16.    Rifaai, Y., Yahia, A., Mostafa, A., Aggoun, S., Kadri, E.-H., 2020. Rheological and Mechanical Properties of Alkali-Activated Hybrid Matrix for Self-consolidating Concrete. RILEM Bookseries 23, 508–516. https://doi.org/10.1007/978-3-030-22566-7_59

17.    Roufael, G., Beaucour, A.-L., Eslami, J., Hoxha, D., Noumowé, A., 2020. Influence of lightweight aggregates on the physical and mechanical residual properties of concrete subjected to high temperatures. Construction and Building Materials 121221. https://doi.org/10.1016/j.conbuildmat.2020.121221

18.    Sasportas, R., Mustapha, F., 2020. Modular architecture shape design recursive algorithm. E3S Web Conf. 170, 06006. https://doi.org/10.1051/e3sconf/202017006006

19.    Tahar, Z., Benabed, B., Kadri, E.H., Ngo, T.-T., Bouvet, A., 2020. Rheology and strength of concrete made with recycled concrete aggregates as replacement of natural aggregates. Epitoanyag 72, 48–58. https://doi.org/10.14382/epitoanyag-jsbcm.2020.8

20.    Vigroux, M., Eslami, J., Beaucour, A.-L., Bourgès, A., Noumowé, A., 2020. High temperature behaviour of various natural building stones. Construction and Building Materials 121629. https://doi.org/10.1016/j.conbuildmat.2020.121629

21.    Hamdaoui, S., Lambert, A., Khireddine, H., Agniel, R., Cousture, A., Coulon, R., Gallet, O., Alfonsi, S., Hindie, M., 2020. An efficient and inexpensive method for functionalizing metallic biomaterials used in orthopedic applications. Colloid and Interface Science Communications 37, 100282. https://doi.org/10.1016/j.colcom.2020.100282

22.    Sciaretta F., Eslami J., Beaucour A.-L., Noumowé A. State-of-the-art of construction stones for masonry exposed to high temperature. Construction & Building Materials, Vol. X, 2021.

23.    Elat E., Pliya P., Pierre A., Mbessa M., Noumowe A. Microstructure and mechanical behaviour of concrete based on crushed sand combined with alluvial sand. Civil Engineering, Vol. 1, 2020.

24.    Algourdin N., Beaucour A., Pliya P., Simon A., Noumowe A. Influence of polypropylene and steel fibres on thermal spalling and physical-mechanical properties of concrete under different heating rates. Construction & Building Materials, Vol. 259, 2020.

25.    Beaucour A., Pliya P., Njinwoua R., Pelligrino C., Noumowé A., Faleschini F. Influence of elevated temperature on radiation shielding concrete with electric arc furnace slag as coarse aggregate. Construction & Building Materials, Vol. 256, 2020.

A. Barkat, S. Kenai, E.H. Kadri B. Menadi, H. Soualhi
Effects of local metakaolin addition on rheological and mechanical performance of self-compacting limestone cement concrete
Journal of Adhesion Science and Technology (Accepté), 2019.

A.L. Bonifacio, J.C. Mendes, M.C. Farage, F.S. Barbosa, C.B. Barbosa, & A.L. Beaucour
Application of Support Vector Machine and Finite Element Method to predict the mechanical properties of concrete.
Latin American Journal of Solids and Structures, 16(7), 2019.

A. Boukhelkhal, L. Azzouz, S. Kenai, E.H. Kadri, B. Benaded
Combined effects of mineral additions and curing conditions on strength and durability of self-compacting mortars exposed to aggressive solutions in the natural hot-dry climate in North African desert region
Construction and Building Materials, Vol. 197, pp 307-318, 2019. (Online)
https://doi.org/10.1016/j.conbuildmat.2018.11.233

E. Ghorbel, G. Wardeh, H. Fares
Mechanical and fracture properties of recycled aggregate concrete in design codes and empirical models
First published: 25 June 2019, Structural Concrete, journal of fib
https://doi.org/10.1002/suco.201800335

T. Harlé, T.M.G. Nguyen, B. Ledésert, Y. Mélinge, R. Hebert
Cross-linked polyurethane as solid-solid phase change material for low temperature thermal energy storage.
Accepté pour publication, janvier 2019. Thermochimica Acta, 2019

A. Hasnaoui, E. Ghorbel, G. Wardeh
Optimization approach of granulated blast furnace slag and metakaolin based geopolymer mortars
Construction and Building Materials Volume 198, 20 February 2019, Pages 10-26

M. Lekkam, A. Benmounah, E.H. Kadri, H. Soualhi, A. Kaci,
Influence of saturated activated carbon on the rheological and mechanical properties of cementitious materials
Construction and Building Materials, Volume 198, pp 411–422, 2019. (Online)
https://doi.org/10.1016/j.conbuildmat.2018.11.257

M. Limaiem, E. Ghorbel, O. Limamb
Comparative experimental study of concrete reparation with carbon epoxy & bio-resourced composites
Construction and Building Materials, Volume 210, 20 June 2019, Pages 312-323

J.M. Moreno-Maroto, A.L. Beaucour, B. González-Corrochano, et al.
Study of the suitability of a new structural concrete manufactured with carbon fiber reinforced lightweight aggregates sintered from wastes.
Materiales de Construcción, 2019, vol. 69, no 336, p. 204.

F. Mostefa, N-E Bouhamou, S. Aggoun, H. Mesbah
Elaboration of geopolymer cement based on dredged sediment.
Journal of materials and engineering structures, volume 6, issue1, 39-51, 2019.

T.-H. Nguyen, E. Ghorbel, H. Fares, A. Cousture
Bacterial self-healing of concrete and durability assessment
Cement and Concrete Composites, Volume 104, November 2019, 103340

M. Nouali, Z. Derriche, E. Ghorbel & L. Chuanqiang
Plastic bag waste modified bitumen a possible solution to the Algerian road pavements
Road Materials and Pavement Design, 03 Jan 2019
https://doi.org/10.1080/14680629.2018.1560355

P. Pliya, D. Cree, H. Hajiloo, A.L. Beaucour, M.F. Green, & A. Noumowé, (2019).
High-strength concrete containing recycled coarse aggregate subjected to elevated temperatures.
Fire Technology, 55(5), 1477-1494.

S. Rahal, A. Sellier,
Influence of crack reclosure on concrete permeability,
Theoretical and Applied Fracture Mechanics, Volume 100, 2019, Pages 65-77, ISSN 0167-8442,
https://doi.org/10.1016/j.tafmec.2018.11.010.

Y. Rifaai, A. Yahia, A. Mostafa, S. Aggoun, E-H. Kadri
Rheology of fly ash-based geopolymer : Effet of NaOH concentration.
Construction and Building Materials, 223 (2019) 583–594.

G. Wardeh, E. Ghorbel
Shear strength of reinforced concrete beams with recycled aggregates
Advances in Structural Engineering, First Published February 17, 2019
https://doi.org/10.1177/1369433219829815

F. Amann, Y. Le Gonidec, S. Montse, S. Gschwind, J. Wassermann, C. Nussbaum, J. Sarout, 2018.
Analysis of acoustic emissions recorded during a mine-by experiment in an underground research laboratory in clay shales
International Journal of Rock Mechanics and Mining Sciences 106, 51–59.

M. Adjoudj, K. Ezziane, E.H. Kadri, H. Soualhi
Study of the rheological behavior of mortar with Silica Fume and superplasticizer admixtures according to the water film thickness
KSCE Journal of Civil Engineering,Volume 22, issue 7, pp 2480- 2491, 2018
https://link.springer.com/article/10.1007/s12205-017-0228-3

A-A. Belkadi, S. Aggoun, C. Amouri, A. Guettala, H. Houari
Effect of vegetable and synthetic fibers on mechanical performance and durability of Metakaolin-based mortars.
Journal of Adhesion Science and Technology, Volume: 32, Issue: 15, 1670-1686 (2018).

D. Boukhelkhal, O. Boukendakdji, S. Kenai, E.H. Kadri,
Combined effect of mineral admixture and curing temperature on mechanical behavior and porosity of SCC
Advances in Concrete Construction Volume: 6 N°1, pp: 69-85, 2018.
https://doi.org/10.12989/acc.2018.6.1.069

C. David, J. Wassermann, F. Amann, D. A. Lockner, E. H. Rutter, T. Vanorio, ... & J. Fortin, 2018.
KG²B, a collaborative benchmarking exercise for estimating the permeability of the Grimsel granodiorite–Part 1: measurements, pressure dependence and pore-fluid effects.
Geophysical Journal International, 215(2), 799-824.

C. David, J. Wassermann, F. Amann, J. Klaver, C. Davy, J. Sarout, ... & P. Delage, 2018.
KG²B, a collaborative benchmarking exercise for estimating the permeability of the Grimsel granodiorite—Part 2: modelling, microstructures and complementary data.
Geophysical Journal International, 215(2), 825-843.

Z. Didouche, K. Ezziane, E.H. Kadri,
Predicted of hydration heat and compressive strength of limestone cement mortar with different type of superplasticizer
Advances in Concrete Construction Volume 6 N°6, pp: 659-677, 2018.
https://doi.org/10.12989/acc.2018.6.6.659

M.Djezzar, K.Ezziane,A.Kadri,E.H.Kadri,
Modeling of ultimate value and kinetic of compressive strength and hydration heat of concrete made with different replacement rates of silica fume and w/b ratios
Advances in Concrete ConstructionVolume 6N°3,pp:297-309, 2018.
http://dx.doi.org/10.12989/acc.2018.6.3.297

O. Elalaoui, E. Ghorbel, M. Ben Ouezdou
Influence of flame retardant addition on the durability of epoxy based polymer concrete after exposition to elevated temperature
Construction and Building Materials Volume 192, 20 December 2018, Pages 233-

J. Eslami, C. Walbert, A.L. Beaucour, A. Bourges, A. Noumowé
Influence of physical and mechanical properties on the durability of limestone subjected to freeze thaw cycles.
Construction and Building Materials Vol.162, pp 420-429, Febr 2018.

D. Giovannacci, H.-C. Chung, D. Martos-Levif, B. Jackson, G.C. Walker, J. Bowen, D. Brissaud, L. Cristofol, Y. Mélinge
Time Domain Imaging (TDI) system in the terahertz (THz) range for immovable cultural heritage materials
Strain. ISSN 1475-1305, 2018

O. Helson, J. Eslami, A.L. Beaucour, A. Noumowé, P. Gotteland
Durability of soil mix material subjected to wetting/drying cycles and external sulfate attacks.
Construction and Building Materials, 192, 416-428, dec. 2018.

O. Helson, J. Eslami, A.L. Beaucour, A. Noumowé, P. Gotteland
Hydro-mechanical behaviour of soilcretes through a parametric laboratory study.
Construction and Building Materials, vol. 166. pp 657-667. March 2018.

J.J. Hessouh, J. Eslami, A.L. Beaucour, O. Helson, A. Noumowé, P. Gotteland
Study of effect of soft inclusion on the mechanical behavior of soilcrete mixtures: experimental and modeling approaches.
Materials and Structures, 51(5), 137, oct. 2018.

O. Kouider Djelloul, B. Menadi, G. Wardeh and S. Kenai
Performance of self-compacting concrete made with coarse and fine recycled concrete aggregates and slag.
Advance in concrete construction. Volume 6 (2018), Issue 2, pages 103-121

T. Masri, H. Ounis, L. Sedira, A. Kaci, and A. Benchabane (2018).
Characterization of new composite material based on date palm leaflets and expanded polystyrene wastes.
Construction and Building Materials 164, 410–418.

F. Mostefa, N-E Bouhamou, H. Mesbah, S. Aggoun, D. Mekhatria
Sedimentary clays as geopolymer precursor.
International Journal of Engineering Research in Africa, volume 39, 97-111, 2018.

S. Omary, E. Ghorbel, G. Wardeh, M.D. Nguyen
Mix Design and Recycled Aggregates Effects on the Concrete’s Properties
International Journal of Civil Engineering 2018, 16(8), pp. 973-992

A. Pierre, D. Weger, A. Perrot, D. Lowke
Penetration of cement pastes into sand packings during 3D printing: analytical and experimental study,
Materials and Structures (2018) 51:22.

A. Rezzoug, S. Abdi, A. Kaci, and M. Yandouzi (2018).
Thermal spray metallisation of carbon fibre reinforced polymer composites: Effect of top surface modification on coating adhesion and mechanical properties.
Surface and Coatings Technology 333, 13–23.

M. Si-Ahmed, S. Kenai, E. Ghorbel
Performance of cement mortar with waste ground clay brick
MRS Advances © 2018 Materials Research Society
DOI: 10.1557/adv.2018.291

G. Wardeh and E. Ghorbel
Experimental Investigation and Analytical Study on the Flexural Behavior of Reinforced Recycled Aggregate Concrete Beams
Journal of Modern Mechanical Engineering and Technology, Pages 1-23, Volume 5, 2018
DOI: http://dx.doi.org/10.15377/2409-9848.2018.05.1

G. Wardeh, E. Ghorbel, H. Gomart, Bruno Fiorio
Experimental and analytical study of bond behavior between recycled aggregate concrete and steel bars using a pullout test
Structural concrete, October 2017, Volume 18, Issue 5, pp 811-825

A. Younsi, A. Bordy, S. Aggoun, B. Fiorio
Hydratation-drying in OPC pastes blended with recycled OPC paste fine powder: Critical curing relative humidity hampering hydration.
Construction and Building Materials, 190 (2018) 403-413.

M. Adjoudj, K. Ezziane, E.H. Kadri, H. Soualhi
Study of the rheological behavior of mortar with Silica Fume and superplasticizer admixtures according to the water film thickness
KSCE Journal of Civil Engineering, 2017 (Online).
https://link.springer.com/article/10.1007/s12205-017-0228-3

S. Braymand, S. Roux, H. Fares, K. Déodonne, F. Feugeas
Separation and Quantification of Attached Mortar in Recycled Concrete Aggregates
Waste and Biomass Valorization, Volume 8, Issue 5, pp 1393-1407, July 2017
doi: 10.1007/s12649-016-9771-2

T. Boubekeur, K. Ezziane, E.H. Kadri
Quantification and analysis of heat hydration of blended cement at different temperature
Journal of Adhesion Science and Technology pp 2741-2756, 2017.
http://dx.doi.org/10.1080/01694243.2017.1325557

A. Bourguiba, E. Ghorbel, L. Cristofol, W. Dhaouib
Effects of recycled sand on the properties and durability of polymer and cement based mortars
Construction and Building Materials, Volume 153, 30 October 2017, Pages 44-54
https://doi.org/10.1016/j.conbuildmat.2017.07.029

F.N.G. Brue, C.A. Davy, N. Burlion, F. Skoczylas, X. Bourbone:
Five year drying of high performance concretes: Effect of temperature and cement-type on shrinkage.
Cement and Concrete Research 99,  pp 70–85, 2017

L. Chaabane, E.H. Kadri, Y. Sebaibi, H. Soualhi
Dune sand and pumice impact on lightweight mechanical and thermal concrete properties
Construction and Building Materials, Vol 133, pp 209–218, 2017.
https://doi.org/10.1016/j.conbuildmat.2016.12.043

K. Falek, K. Aoudjane, E.H. Kadri,
Effect of recycled aggregates on the mechanical and rheological properties of concrete
Journal Wulfenia, Volume 24, N 3 pp 159- 170, 2017 (Online).
http://www.multidisciplinarywulfenia.org/auto/index.php/archive/part/24/3/1/?currentVol=24&currentissue=3

O. Helson, A.L. Beaucour, J. Eslami, A. Noumowé, P. Gotteland
Physical and mechanical properties of soilcrete mixtures : soil clay content and formulation parameters
Construction and Building Parameters, Construction and Building Materials. Vol.131, 2017

F. Humbert, L. Sonnette, M.O. de Kock, P. Robion, C.S. Horng, A. Cousture and H. Wabo
Palaeomagnetism of the early Palaeoproterozoic, volcanic Hekpoort Formation (Transvaal Supergroup) of the Kaapvaal craton,South Africa
Geophysical Journal International (2017) 209, 842–865

I. Irki, F. Debieb, E.H. Kadri, O. Boukendakdji, M. Bentchikou, H. Soualhi
Effect of the length and the volume fraction of wavy steel fibers on the behavior of self-compacting concrete
Journal of Adhesion Science and Technology,Volume 31, issue 7,  pp 735-748, 2017.
https://dx.doi.org/10.1080/01694243.2016.1231394

L.H. Nguyen, A.L. Beaucour, S. Ortola, A. Noumowé
Experimental study on the thermal properties of lightweight aggregate concretes at different moisture contents and ambient temperatures
Construction and Building Materials, Vol. 151, pp 720-731, Oct 2017

M. Omrane, S. Kenai, E.H. Kadri, A. Ait Mokhtar
Performance and durability of self-compacting concrete using recycled concrete aggregates and natural pozzolan
Journal of Cleaner Production Volume: 165, pp: 415-430, 2017.
https:// doi: 10.1016/j.jclepro.2017.07.139

A. Pierre, A. Perrot, A. Histace, S. Gharsalli, E.H. Kadri
A study on the limitations of a vane rheometer for mineral suspensions using image processing
Rhéologie Acte Volume 56 , Issue 4 , pp: 351-367, 2017.
http :// doi: 10.1007/s00397-017-0993-4

S. Safiddine , F. Debieb, E.H. Kadri, B. Menadi, F. Cussigh, H. Soualhi
Effect of crushed sand and limestone crushed sand dust on the rheology of cement mortar.
Applied Rheology, Vol 27, issue 1, Number 14490, 2017.
http://doi:10.3933/Appl Rheol-27-14490

G. Samson, A. Phelipot-Mardelé, C. Lanos, A. Pierre
Quasi-static bubble in a yield stress fluid: elasto-plastic mode
Rheologica Acta 5 (2017) 431-443.

H. Soualhi, E.H. Kadri, A. Bouvet, T.T. Ngo, F. Cussigh, A. Belaidi
New model to estimate plastic viscosity of eco-friendly and conventional concrete
Construction and Building Materials, Vol 135, pp 323–334, 2017.
http://dx.doi.org/10.1016/j.conbuildmat.2017.01.009

H. Soualhi, E.H. Kadri, T.T. Ngo, A. Bouvet, F. Cussigh, Z. Tahar
Design of portable rheometer with new vane geometry to estimate concrete rheological parameters
Journal of Civil Engineering and Management. Volume 23, Issue 3, pp. 347-355, 2017
http://www.tandfonline.com/doi/abs/10.3846/13923730.2015.1128481

Z. Tahar, T.T.Ngo, E.H. Kadri, A. Bouvet, F. Debieb, S. Aggoun
Effect of cement and admixture on the utilization of recycled aggregates in concrete
Construction and Building Materials, Vol 149, pp 91–102, 2017.  
DOI: 10.1016/j.conbuildmat.2017.04.152

O. Taleb, F. Ghomari, M. Boukli hacene, E.H. Kadri, H. Soualhi
Effect Formulation and rheology of eco-self-compacting concrete (Eco-SCC)
Journal of Adhesion Science and Technology, Volume 31, issue 3, pp 272-296, 2017.
http://dx.doi.org/10.1080/01694243.2016.1215010

W. Yahiaoui, S. Kenai, B. Menadi, E.H. Kadri,
Durability of self-compacted concrete containing slag in hot climate
Advancesin Concrete Construction, Volume 5, Issue 3, pp: 271-288, 2017,  
DOI: 10.12989/acc.2017.5.3.271

N. Yermak, P. Pliya, A.L. Beaucour, A. Simon, A. Noumowé
Influence of steel and/or polypropylene fibres on the behaviour of concrete at high temperature : spalling, transfer and mechanical properties
Construction and Building Materials, vol 132, 2017

L. Chaabane, E.H. Kadri, Y. Sebaibi, H. Soualhi ²
Dune sand and pumice impact on lightweight mechanical and thermal concrete properties
Construction and building Materials, Accepté 2016.

B. Benabed, H. Soualhi, Ase Belaidi, L. Azzouz, E.H. Kadri, S. Kenai
Effect of limestone powder as a partial replacement of crushed quarry sand on properties of self-compacting repair mortars
Journal of Building Materials and Structures. Volume 3, Issue 1, pp 15-30, 2016.

J. C. Bidoung, P. Pliya, P. Meukam, A. Noumowé, T. Beda
Behaviour of clay bricks from small-scale production units after high temperature exposure.
Materials and Structures, Vol. XX, 2016.

M. Guendouz, F. Debieb, O. Boukendakdji, E.H. Kadri, M. Bentchikou, H. Soualhi.
Use of plastic waste in sand concrete.
Journal of Materials and Environmental Science. Volume 7, Issue 2, pp382–389, 2016.

I. Irki, F. Debieb, E.H. Kadri, O. Boukendakdji, M. Bentchikou, H. Souali
Effect of the length and the volume fraction of wavy steel fibers on the behavior of self-compacting concrete
Journal of Adhesion Science and Technology, pp 1-14, 2016.

C. Laneyrie, A.-L. Beaucour, M. Green, R. Hebert, B. Ledesert, A. Noumowé
Influence of recycled coarse aggregates on normal and high performance concrete subjected to elevated temperatures,
Construction & Building Materials. Vol. 111, 2016.

P. López-Arce, M. Tagnit-Hammou, B. Menéndez, J.-D. Mertz, and A. Kaci (2016).
Durability of stone-repair mortars used in historic buildings from Paris.
Materials and Structures 49, 5097–5115.

P. Lopez-Arce, M. Tagnit-Hammou, B. Menendez, J.D. Mertz, M. Guiavarc’h, A. Kaci, S. Aggoun, A. Cousture
Physico-chemical stone-mortar compatibility of commercial stone-repair mortars of historic buildings from Paris
Construction and Building Materials, Volume 124, 15 October 2016, Pages 424–441

Z. Makhloufi, S. Aggoun, B. Benabed, E.H. Kadri,
Effect of magnesium sulfate on the durability of limestone mortars based on quaternary blended cements
Cement Concrete and Composites, Vol. 65, pp186–199, 2016.

R. Niry Razafinjato, A.-L. Beaucour, R. Hebert, B. Ledesert, R. Bodet, A. Noumowé
High Temperature behaviour of a wide petrographic range of siliceous and calcareous aggregates for concretes,
Construction & Building Materials, Vol. 123, 2016

R. Siddique, V. Nanda, E.H. Kadri, I. Khan
Influence of bacteria on compressive strength and permeation properties of concrete made with cement baghouse filter dust
Construction and building Materials, Vol 106, pp 461–469, 2016.

H. Soualhi, E.H. Kadri, T.T. Ngo, A. Bouvet, F. Cussigh, Z. Tahar
Design of portable rheometer with new vane geometry to estimate concrete rheological parameters
Journal of Civil Engineering and Management. pp 1-9, 2016.

O. Taleb, F. Ghomari, M. Boukli Hacene, E.H. Kadri, H. Soualhi
Effect Formulation and rheology of eco-self-compacting concrete (Eco-SCC)
Journal of Adhesion Science and Technology, pp 272-296, 2016.

H.T. Thong, A. Kaci, E.H. Kadri, T. T. Ngo, A. Trudel, S. Lecrux
A New Method of Controlling Water in Self-Compacting Concrete Production
8th International RILEM Symposium on Self-Compacting Concrete - SCC2016,  Edited by Khayat, Washington D.C., USA, May 15-18, Book Series, RILEM Proceedings Volume 100, pp 265-275, 2016.
https://www.rilem.net/gene/main.php?base=500218&id_publication=459

H. Thong, E.H. Kadri, A. Kaci, T. T. Ngo, A. Trudel, S. Lecrux
Advanced online water content measurement for self-compacting concrete production in ready-mixed concrete plants
Construction and building Materials, Vol 112, pp 570–580, 2016.

F. Touloum, A. Younsi, A. Kaci, and A. Benchabane (2016).
Formulation of a composite of date palm wood-cement.
Journal of Applied Engineering Science & Technology 2, 57–63.

N. Yermak, P. Pliya, A.-L. Beaucour, A. Simon, A. Noumowé
Influence of steel and/or polypropylene fibres on the behaviour of concrete at high temperature: spalling, transfer and mechanical properties.
Construction & Building Materials, Vol. XX, 2016.

G. Adegoloye, A.-L. Beaucour, S. Ortola, A. Noumowé
Concretes made of EAF slag and AOD slag aggregates from stainless steel process: mechanical properties and durability.
Construction and Building Materials, Vol. 76, 2015.

A.S. Belaidi, S. Kenai, E.H. Kadri, H. Soualhi, B. Benchaa
Effects of experimental ternary cements on fresh and hardened properties of self-compacting concrete
Journal of Adhesion Science and Technology, pp 247-261, 2015.

H. Fares, H. Toutanji, K. Pierce, A. Noumowé
Lightweight Self-consolidating Concrete Exposed to Elevated Temperature,
ASCE's Journal of Materials in Civil Engineering, Vol. 27, Issue 12, 2015.

S. Grousset, F. Kergourlay, D. Neff, E. Foy, J.-L. Gallias, S. Reguer, P. Dillmann, A. Noumowé
In situ monitoring of corrosion processes by coupled micro-XRF/micro-XRD mapping to understand the degradation mechanisms of reinforcing bars in hydraulic binders from historic monuments,
Journal of Analytical Atomic Spectrometry, 2015.

Q.G. Hoang, A. Kaci, E.H. Kadri, J.L. Gallias
Influence of recycled sand and gravel on the rheological and mechanical characteristic of concrete
Construction and building Materials, Vol 96, pp 119–126, 2015.

H.D. Le., E.H. Kadri, G. De Schutter, S. Aggoune
Effect of lubrification layer on velocity profited of concrete in a pumping pipe
Materials and Structures, pp 3991- 4003, 2015

E.R. Lopez-Villaverde, S. N. Vu, M. K. Nguyen, A. Noumowé
A new Compton scattered tomography modality and its application to material non-destructive evaluation.
International Refereed Journal of Engineering and Science (IRJES), Vol. 4, Issue 1, 2015.

Z. Makhloufi, M. Chettih, M. Bederine, E.H. Kadri, M. Bouhicha
Effect of quaternary cementitious systems containing limestone, blast furnace slag and natural pozzolan on mechanical behavior of limestone mortars
Construction and Building Materials, Vol 95, pp 647–657, 2015.

A. Perrot, D. Rangeard, A. Pierre
3D Printing methods and Structural build-up of cement-based materials
Materials and Structure (2015) DOI 10.1617/s11527-015-0571-0

A. Pierre, C. Lanos, P. Estellé, A. Perrot
Rheological properties of calcium sulfate suspensions
Cement and Concrete Research 76 (2015) 70–81

A. Pierre, A. Perrot, D. Rangeard
Cellulose ethers and cement paste permeability
Cement and Concrete Research 72 (2015) 117-127

C. Settari, F. Debieb, E.H. Kadri, O. Boukendadji
Assessing the effects of recycled asphalt pavement materials on the performance of roller compacted concrete
Construction and building Materials, Vol 101, pp 617–621, 2015.

H. Soualhi, E.H. Kadri, T.T. Ngo, A. Bouvet, F. Cussigh, B. Benabed
Rheology of ordinary and low-impact environmental concretes
Journal of Adhesion Science and Technology., Vol 29 N°20, pp 2160-2175, 2015.

Z. Tahar, E.H. Kadri, T.T.Ngo, A. Bouvet, A. Kaci
Influence of recycled sand and gravel on the rheological and mechanical characteristic of concrete
Journal of Adhesion Science and Technology, pp 392–411, 2015.

H. Toutanji, C. Goff, K. Pierce, H. Fares
Using aggregate flowability testing to predict lightweight self-consolidating concrete plastic properties.
Cement and Concrete Composites, Volume 62, pages 59-66, June 2015
doi: 10.1016/j.cemconcomp.2015.05.003.

C. Walbert, J. Eslami, A.-L. Beaucour, A. Bourges, A. Noumowé
Evolution of the mechanical behaviour of limestone subjected to freeze-thaw cycles.
Environmental Earth Sciences, Vol. 74, Issue 7, 2015.

G. Wardeh, E. Ghorbel, and H. Gomart
Mix Design and Properties of Recycled Aggregate Concretes: Applicability of Eurocode 2
International Journal of Concrete Structures and Materials, March 2015, Volume 9, Issue 1, pp 1-20

Z. Xing, A.-L. Beaucour, R. Hebert, A. Noumowé, B. Ledesert
Aggregate's influence on thermophysical concrete properties at elevated temperature.
Construction & Building Materials, Vol. 95, 2015.

M. Adjoudj, K. Ezziane, E.H. Kadri, T.T. Ngo, A. Kaci
Evaluation of rheological parameters of mortar containing various amounts of mineral addition with polycarboxylate superplasticizer
Construction and Building Materials, Vol 70, pp 549–559, 2014.

B Benchaa, L. Azzouz, E.H. Kadri, S. Kenai,
Effect of fine aggregate replacement with desert dune sand on fresh properties and strength of self-compacting mortars
Journal of Adhesion Sciences and Technology, Vol. 28, issue 21, pp 2128–2195, 2014.

S.E Bensebti, S. Aggoun, E.H. Kadri, O. Haddad
Experimental Test for Evaluation of SCC Static Segregation
Advances in Materials Research, Doi 10.4028/www.scientific.net/AMR Vol 875-877, pp 68-76, 2014.

T. Boubekeur, K. Ezziane, E.H. Kadri
Estimationof mortars compressive strength at different curing temperature by the maturity method
Construction and Building Materials, Vol 71, pp 299–307, 2014.

D. Boucherit, S. Kenai, E.H. Kadri, J. Khatib
Simplified model for the prediction of long term concrete drying shrinkage
KSCE Journal of Civil Engineering, pISSN 1226-7988, eISSN 1976-3808, www.springer.com/12205, pp 2196-2208, 2014.

A.P.G. Ferreira, M.C.R. Farage, F.S. Barbosa, A. Noumowé, N. Renault
Thermo-hydric analysis of concrete-rock bilayers under fire conditions,
Engineering Structures, Vol. 59, 2014.

Y. Ke, S. Ortola, A.L. Beaucour, H. Dumontet
Micro-stress analysis and identification of lightweight aggregate’s failure strength by micromechanical modeling.
Mechanics of Materials, 68 (2014) 176–192.

S. Kenai, B. Menadi, A. Debbih, E.H. Kadri
Effect of Recycled Concrete Aggregates and Natural Pozzolana on Rheology of Self-Compacting Concrete
Key Engineering Materials, Vol 600, pp 256-263, Tran Tech Publications, Switzerland, 2014.

C.T. Mai, E.H. Kadri, T.T. Ngo, A. Kaci
Estimation of pumping pressure from concrete composition based on the identified tribology parameters
Advances in Materials Sciences and Engineering, pp 1-18, ID 503850, 2014

Z. Makloufi, M. Bederinaa, M. Bouhicha, E.H. Kadri,
Effect of mineral admixtures on resistance to sulfuric acid solution of motars with quaternary binders
Physics Procedia Vol 55 pp 329-335, doi: 10.1016/j.phpro.2014.07.048, Science Direct, 2014.

D. Mouhtadi, A. Amahmid, M. Hasnaoui, E.H. Kadri et R. Bennacer
Analysis of the validation of a constant surface heat flux model for the case of blocks submitted to uniform volumetric heat generation and periodically mounted on the lower wall of the horizontal channel
Numerical Heat Transfer, part-A-Applications Vol 65, issue 1, page 26-47, 2014.

D. Mouhtadi, R. Bennacer, A. Amahmid, M. Hasnaoui, O. Rahli, E.H. Kadri
Three-dimensional simulation of natural convection induced by a heating block mounted on the lower wall of a cubical cavity
Physical and Chemical News, Vol 72, pp 01–10, 2014.

L. H. Nguyen, A.-L. Beaucour, S. Ortola, A. Noumowé
Influence of the volume fraction and the nature of fine lightweight aggregates on the thermal and mechanical properties of structural concrete.
Construction and Building Materials, Vol. 51, 2014.

H. Soualhi, E.H. Kadri, T.T. Ngo, A. Bouvet, F. Cussigh, S. Kenai
A vane rheometer for fresh mortar: development and validation
Applied Rheology, Pages 1-7, 2014.

D. Hoxha, J. Eslami, D. Grgic & D.-P. Do
Modeling Damage by Crack Nucleation and Growth in Porous Media.
Constitutive Modeling of Geomaterials - Springer Series in Geomechanics 715–721 (2013).doi:10.1007/978-3-642-32814-5_94

H.G. Nguyen, S. Ortola, E. Ghorbel
Micromechanical modelling of the elastic behaviour of polymer mortars
European Journal of Environmental and Civil Engineering, Volume 17, Issue 2, (2013) 65-83.

Z. Xing, R. Hebert, A-L. Beaucour, B. Ledesert, A. Noumowé
Influence of chemical and mineralogical composition of concrete aggregates on their behaviour at elevated temperature.
Materials and Structures (2013) : 1-20, August, 2013.

S. André, N. Renault, Y. Meshaka & C. Cunat
From the thermodynamics of constitutive laws to the thermomechanical experimental characterization of a semicrystalline polymer from IR imaging.
Continuum Mechanics and Thermodynamics 24, 1–20 (2012).

S. Antit, H. Hassis & B. Fiorio
Flexural Strength of Laminated Waste Concrete—Normal Concrete Beams.
The Journal of Solid Waste Technology and Management 38, 103–116 (2012).

F. S. Barbosa, M. C. R. Farage, A.-L. Beaucour & S. Ortola
Evaluation of aggregate gradation in lightweight concrete via image processing.
Construction and Building Materials 29, 7–11 (2012).

A. S. E. Belaidi, L. Azzouz, E. Kadri & S. Kenai
Effect of natural pozzolana and marble powder on the properties of self-compacting concrete.
Construction and Building Materials 31, 251–257 (2012).

A. Belhaoua, J.-L. Gallias, N. Renault, V.-V. Bui & P. Faucon
Inspection of Railway Track Fastening Elements Using Artificial Vision.
Journal of Transportation research (2012).

B. Benabed, E.-H. Kadri, L. Azzouz & S. Kenai
Properties of self-compacting mortar made with various types of sand.
Cement and Concrete Composites 34, 1167–1173 (2012).

S. Bensebti, S. Aggoun, E.H. Kadri & O. Haddad
Experimental test for evaluation of SCC static segregation.
Advanced Materials Research 26, (2012).

O. Boukendakdji, E.-H. Kadri & S. Kenai
Effects of granulated blast furnace slag and superplasticizer type on the fresh properties and compressive strength of self-compacting concrete.
Cement and Concrete Composites 34, 583–590 (2012).

R. Bouras, A. Kaci & M. Chaouche
Influence of viscosity modifying admixtures on the rheological behavior of cement and mortar pastes.
Korea-Australia Rheology Journal 24, 35–44 (2012).

R. Coquard, B. Rousseau, P. Echegut, D. Baillis, H. Gomart, E. Iacona
Investigations of the radiative properties of Al–NiP foams using tomographic images and stereoscopic micrographs.
International Journal of Heat and Mass Transfer 55(5-6), 1606–1619 (2012).

A. Djoudi, M. M. Khenfer, A. Bali, E. H. Kadri & G. Debicki
Performance of date palm fibres reinforced plaster concrete.
International Journal of the Physical Sciences 7, 2845–2853 (2012).

J. Eslami, D. Hoxha & D. Grgic
Estimation of the damage of a porous limestone using continuous wave velocity measurements during uniaxial creep tests.
Mechanics of Materials 49, 51–65 (2012).

E. H. Kadri, S. Aggoun, S. Kenai & A. Kaci
The Compressive Strength of High-Performance Concrete and Ultrahigh-Performance.
Advances in Materials Science and Engineering 2012, 1–7 (2012).

M. Koabaz, N. Renault, P. Pliya & J.-L. Gallias
Characterization by the Impact-Echo Method of the High Temperature-Induced Damage on Concrete Specimens.
International Review of Civil Engineering (2012).

Z. Makhloufi, E. H. Kadri, M. Bouhicha & A. Benaissa
Resistance of limestone mortars with quaternary binders to sulfuric acid solution.
Construction and Building Materials 26, 497–504 (2012).

Z. Makhloufi, E. H. Kadri, M. Bouhicha, A. Benaissa & R. Bennacer
The strength of limestone mortars with quaternary binders: Leaching effect by demineralized water.
Construction and Building Materials 36, 171–181 (2012).

F. Meftah, S. Dal Pont & B. A. Schrefler
A three-dimensional staggered finite element approach for random parametric modeling of thermo-hygral coupled phenomena in porous media.
International Journal for Numerical and Analytical Methods in Geomechanics 36, 574–596 (2012).

T.-T. Ngo, E.-H. Kadri, F. Cussigh & R. Bennacer
Relationships between concrete composition and boundary layer composition to optimise concrete pumpability.
European Journal of Environmental and Civil Engineering 16, 157–177 (2012).

T.-D. Nguyen & F. Meftah
Behavior of clay hollow-brick masonry walls during fire. Part 1: Experimental analysis.
Fire Safety Journal 52, 55–64 (2012).

R. Siddique, K. Kapoor, E.-H. Kadri & R. Bennacer
Effect of polyester fibres on the compressive strength and abrasion resistance of HVFA concrete.
Construction and Building Materials 29, 270–278 (2012).

F. S. Barbosa, A.-L. Beaucour, M. C. R. Farage & S. Ortola
Image processing applied to the analysis of segregation in lightweight aggregate concretes.
Construction and Building Materials 25, 3375–3381 (2011).

L. Bin, R. Bennacer & A. Bouvet
Evaporation of methanol droplet on the Teflon surface under different air velocities.
Applied Thermal Engineering 31, 3792–3798 (2011).

S. Dal Pont, F. Meftah & B. A. Schrefler
Modeling concrete under severe conditions as a multiphase material.
Nuclear Engineering and Design 241, 562–572 (2011).

K. Ezziane, E. H. Kadri & R. Siddique
Investigation of slag cement quality through the analysis of its efficiency coefficient.
European Journal of Environmental and Civil Engineering 15, 1393–1411 (2011).

H. Fares, S. Rémond, A. Noumowé, A. Cousture
Microstructure et propriétés physico-chimiques de bétons autoplaçants chauffés de 20 à 600°C.
European Journal of Environmental and Civil Engineering. Vol. 15/6 pp 869-888, July 2011.
doi: 10.1080/19648189.2011.9695278

H. Gomart & J. Taine
Validity criterion of the radiative Fourier law for an absorbing and scattering medium.
Physical Review E 83, 021202 (2011).

A. Itim, K. Ezziane & E. H. Kadri
Compressive strength and shrinkage of mortar containing various amounts of mineral additions.
Construction and Building Materials 25, 3603–3609 (2011).

A. Kaci, R. Bouras, V.T. Phan, P.A. Andréani, M. Chaouche & H. Brossas
Adhesive and rheological properties of fresh fibre-reinforced mortars.
Cement and Concrete Composites 33, 218–224 (2011).

A. Kaci, M. Chaouche & P.-A. Andréani
Influence of bentonite clay on the rheological behaviour of fresh mortars.
Cement and Concrete Research 41, 373–379 (2011).

A. Kaci, N. Ouari, G. Racineux & M. Chaouche
Flow and blockage of highly concentrated granular suspensions in non-Newtonian fluid.
European Journal of Mechanics - B/Fluids 30, 129–134 (2011).

E. H. Kadri, S. Kenai, K. Ezziane, R. Siddique & G. De Schutter
Influence of metakaolin and silica fume on the heat of hydration and compressive strength development of mortar.
Applied Clay Science 53, 704–708 (2011).

M. Kanéma, P. Pliya, A. Noumowé & J.-L. Gallias
Spalling, Thermal, and Hydrous Behavior of Ordinary and High-Strength Concrete Subjected to Elevated Temperature.
Journal of Materials in Civil Engineering 23, 921–930 (2011).

A. S. Kodjo, P. Rivard, F. Cohen-Tenoudji & J.-L. Gallias
Impact of the alkali–silica reaction products on slow dynamics behavior of concrete.
Cement and Concrete Research 41, 422–428 (2011).

A. Merdas, B. Fiorio & N. E. Chick
Etude de l’adhérence des joncs et des plats composites avec le béton par flexion (beam test).
Comptes Rendus de Mécanique 339, 743–814 (2011).

T.-T. Ngo, E. H. Kadri, F. Cussigh & R. Bennacer
Measurement and modeling of fresh concrete viscous constant to predict pumping pressures.
Canadian Journal of Civil Engineering 38, 944–956 (2011).

V.-H. Nguyen, S. Remond & J.-L. Gallias
Influence of cement grouts composition on the rheological behaviour.
Cement and Concrete Research 41, 292–300 (2011).

P. Pliya, A. Beaucour & A. Noumowé
Contribution of cocktail of polypropylene and steel fibres in improving the behaviour of high strength concrete subjected to high temperature.
Construction and Building Materials 25, 1926–1934 (2011).

B. Rousseau, H. Gomart, D. Zanghi, D. Bernard & M. Stampanoni
Synchrotron x-ray μ-tomography to model the thermal radiative properties of an opaque ceramic coating at T = 1000 K.
Journal of Materials Research 25, 1890–1897 (2011).

B. Rousseau, H. Gomart, D. De Sousa Meneses, P. Echegut, M. Rieu, R. Dugas, P. Lenormand, F. Ansart
Modelling of the radiative properties of an opaque porous ceramic layer.
Journal of Electroceramics (2) 27, 89–92 (2011).

M. Said-Mansour, E. H. Kadri, S. Kenai, M. Ghrici & R. Bennaceur
Influence of calcined kaolin on mortar properties.
Construction and Building Materials 25, 2275–2282 (2011).

R. Siddique, Y. Aggarwal, P. Aggarwal, E. H. Kadri & R. Bennacer
Strength, durability, and micro-structural properties of concrete made with used-foundry sand (UFS).
Construction and Building Materials 25, 1916–1925 (2011).

R. Siddique & E. H. Kadri
Effect of metakaolin and foundry sand on the near surface characteristics of concrete.
Construction and Building Materials 25, 3257–3266 (2011).

Z. Xing, A.-L. Beaucour, R. Hebert, A. Noumowé & B. Ledesert
Influence of the nature of aggregates on the behaviour of concrete subjected to elevated temperature.
Cement and Concrete Research 41, 392–402 (2011).

A. Alrifai, S. Aggoun, E.-H. Kadri, G. De Schutter & A. Noumowé
Influence of aggregate skeleton on shrinkage properties: validation of the model developed by Le Roy for the case of self-compacting concrete.
Materials and Structures 44, 949–959 (2010).

A. Bougara, E.-H. Kadri & K. Ezziane
Efficiency of granulated blast furnace slag replacement of cement according to the equivalent binder concept.
Cement and Concrete Composites 32, 226–231 (2010).

A. Bouvet, E. Ghorbel & R. Bennacer
The mini-conical slump flow test: Analysis and numerical study.
Cement and Concrete Research 40, 1517–1523 (2010).

B. Craeye, G. De Schutter, B. Desmet, J. Vantomme, G. Heirman, L. Vandewalle, Ö. Cizer, S. Aggoun & E.-H. Kadri
Effect of mineral filler type on autogenous shrinkage of self-compacting concrete.
Cement and Concrete Research 40, 908–913 (2010).

M. V. G. De Morais, P. Pliya, A. Noumowé, A.-L. Beaucour & S. Ortola
Contribution to the explanation of the spalling of small specimen without any mechanical restraint exposed to high temperature.
Nuclear Engineering and Design 240, 2655–2663 (2010).

J. Eslami, D. Grgic & D. Hoxha
Estimation of the damage of a porous limestone from continuous (P- and S-) wave velocity measurements under uniaxial loading and different hydrous conditions.
Geophysical Journal International 183, 1362–1375 (2010).

K. Ezziane, E.-H. Kadri, A. Bougara & R. Bennacer
Analysis of Mortar Long-term Strength with Supplementary Cementitious Materials Cured at Different Temperatures.
ACI, Materials Journal 107, 323–331 (2010).

H. Fares, S. Remond, A. Noumowé & A. Cousture
High temperature behaviour of self-consolidating concrete. Microstructure and physicochemical properties.
Cement and Concrete Research 40, 488–496 (2010).

H. Fares, A. Noumowé, S. Rémond, R. Cabrillac
Bétons autoplaçants à haute température : Propriétés mécaniques et physico-chimiques.
European Journal of Environmental and Civil Engineering, Vol. 14/1, pp 29-54, Jan. 2010.
doi:10.3166/ejece.14.29-54.

A. Hallal, E. H. Kadri, K. Ezziane, A. Kadri & H. Khelafi
Combined effect of mineral admixtures with superplasticizers on the fluidity of the blended cement paste.
Construction and Building Materials 24, 1418–1423 (2010).

Y. Ke, S. Ortola, A.L. Beaucour, H. Dumontet
Identification of microstructural characteristics in lightweight aggregate concretes by micromechanical modelling including the interfacial transition zone (ITZ),
Cement and Concrete Research, Volume 40, Issue 11, November 2010, p. 1590-1600

M. A. S. Mohamed, E. Ghorbel & G. Wardeh
Valorization of micro-cellulose fibers in self-compacting concrete.
Construction and Building Materials 24, 2473–2480 (2010).

T. T. Ngo, E. H. Kadri, R. Bennacer & F. Cussigh
Use of tribometer to estimate interface friction and concrete boundary layer composition during the fluid concrete pumping.
Construction and Building Materials 24, 1253–1261 (2010).

T.-T. Ngo, E.-H. Kadri, F. Cussigh, R. Bennacer & R. Duval
Practical Tribometer to Estimate Pumpability of Fresh Concrete.
Journal of Asian Architecture and Building Engineering 9, 229–236 (2010).

B. Rousseau, H. Gomart, D. Zanghi, D. Bernard, M. Stampanoni
Synchrotron X-ray µ-tomography to model the thermal radiative properties of an opaque ceramic coating at T=1000 K
Journal of Materials Research, 25(10), 1890-1897 (2010).

M.T. Ta, J.Y. Rolland, P. Echegut, B. Rousseau, M. Zaghrioui, F. Giovannelli, H. Gomart, P. Lenormand, F. Ansart
Prediction of thermal radiative properties (300–1000 K) of La2NiO4+δ ceramics
Applied Physics Letters 97, 181917 (2010).

G. Wardeh, M. A. Mohamed & E. Ghorbel
Analysis of concrete internal deterioration due to frost action.
Journal of Building Physics 35, 54–82 (2010).

K. Ezziane, E. H. Kadri, A. Hallal & R. Duval
Effect of mineral additives on the setting of blended cement by the maturity method.
Materials and Structures 43, 393–401 (2009).

H. Fares, A. Noumowé, S. Rémond
Self-compacting concrete subjected to high temperature : Mechanical and physico-chemical properties.
Cement and Concrete Research, Volume 39, Issue 12, pages 1230-1238, December 2009
doi: 10.1016/j.cemcenres.2009.08.001.

A. Kaci, M. Chaouche, P.-A. Andreani & H. Brossas
Rheological behaviour of render mortars.
Appl. Rheol. 13794 (2009).doi:10.3933/ApplRheol-19-13794

A. Kaci, R. Bouras, M. Chaouche, P.-A. Andreani & H. Brossas
Adhesive and Rheological Properties of Mortar Joints.
Applied Rheology 51970 (2009).doi:10.3933/ApplRheol-19-51970

E.-H. Kadri, S. Aggoun & G. De Schutter
Interaction between C3A, silica fume and naphthalene sulphonate superplasticiser in high performance concrete.
Construction and Building Materials 23, 3124–3128 (2009).

E.-H. Kadri, R. Duval, S. Aggoun & S. Kenai
Silica Fume Effect on Hydration Heat and Compressive Strength of High-Performance Concrete.
ACI materials journal 106, 107–113 (2009).

Y. Ke, A.L. Beaucour, S. Ortola, H. Dumontet, R. Cabrillac
Influence of volume fraction and characteristics of lightweight aggregates on the mechanical properties of concrete,
Construction and Building Materials, 23 (8), 2009, p. 2821-2828.

S. Malab, A. Benaïssa, S. E. Boudraa & S. Aggoun
Drying Kinetics of Self Compacting Concrete.
Turkish Journal of Engineering and Environment Sciences 33, 135–145 (2009).

R. Siddique, G. de Schutter & A. Noumowé
Effect of used-foundry sand on the mechanical properties of concrete.
Construction and Building Materials 23, 976–980 (2009).

A.-M. Tang, Y.-J. Cui, J. Eslami & P. Défossez
Analysing the form of the confined uniaxial compression curve of various soils.
Geoderma 148, 282–290 (2009).

S. Aggoun, M. Cheikh-Zouaoui, N. Chikh & R. Duval
Effect of some admixtures on the setting time and strength evolution of cement pastes at early ages.
Construction and Building Materials 22, 106–110 (2008).

S. André, C. Baravian, N. Renault & C. Cunat
In situ mechanical characterisation of polymers with the association of three optical techniques.
Applied Physic Letters 91, (2008).

C. Baravian, S. André, N. Renault, N. Moumini & C. Cunat
Optical techniques for in situ dynamical investigation of plastic damage.
Rheologica Acta 47, 555–564 (2008).

G. Casalino & E. Ghorbel
Numerical model of CO2 laser welding of thermoplastic polymers.
Journal of Materials Processing Technology 207, 63–71 (2008).

N. Chikh, M. Cheikh-Zouaoui, S. Aggoun & R. Duval
Effects of calcium nitrate and triisopropanolamine on the setting and strength evolution of Portland cement pastes.
Materials and Structures 41, 31–36 (2008).

E. Ghorbel
A viscoplastic constitutive model for polymeric materials.
International Journal of Plasticity 24, 2032–2058 (2008).

S. Haddadi, E. Ghorbel & N. Laradi
Effects of the manufacturing process on the performances of the bituminous binders modified with EVA.
Construction and Building Materials 22, 1212–1219 (2008).

S. Rémond, J. L. Gallias & A. Mizrahi
Characterization of voids in spherical particle systems by Delaunay empty spheres.
Granular Matter 10, 329–334 (2008).

S. Rémond, J. L. Gallias & A. Mizrahi
Simulation of the packing of granular mixtures of non-convex particles and voids characterization.
Granular Matter 10, 157–170 (2008).

N. Renault, S. André, D. Maillet & C. Cunat
A two-step regularized inverse solution for 2-D heat source reconstruction.
International Journal of Thermal Sciences 47, 834–847 (2008).

S. Saoula, H. Haddadi, E. Ghorbel & K. Ait Mokhtar
Improvement of the stability of a modified bituminous binders within EVA.
International Journal of Applied Engineering Research 3, 575–584 (2008).

P. Saxena, H. Toutanji & A. Noumowé
Failure Analysis of FRP-Strengthened RC Beams.
Journal of Composites for Construction 12, 2–14 (2008).

G. Wardeh & B. Perrin
Numerical modelling of the behaviour of consolidated porous media exposed to frost action.
Construction and Building Materials 22, 600–608 (2008).

G. Wardeh & B. Perrin
Freezing–thawing phenomena in fired clay materials and consequences on their durability.
Construction and Building Materials 22, 820–828 (2008).